Makita 6402 5.2 Amp 3/8-Inch Drill |  | Brand: Makita
Category: Home Improvement
List Price: $182.60
Buy New: $109.96
as of 7/31/2010 19:26 CDT details
You Save: $72.64 (40%)
New (4) from $109.96
Seller: Amazon.com
Rating:  reviews
Sales Rank: 38372
Media: Tools & Hardware
Number Of Items: 1
Shipping Weight (lbs): 3.7
Dimensions (in): 10.4 x 8.5 x 2.9
MPN: 6402
Model: 6402
UPC: 088381001939
EAN: 0088381001939
ASIN: B00004YOEO
Shipping: Eligible for FREE Super Saver Shipping
Availability: Usually ships in 24 hours
| |
| Features:
| • | Powerful 5.2 AMP motor for super duty performance | | • | Variable speed for drilling in a wide variety of materials | | • | Separate reversing switch | | • | Large recessed lock-on button | | • | Heavy-duty industrial drill chuck |
|
| Accessories:
|
| Similar Items:
| |
| Editorial Reviews:
Product Description
This drill boasts a powerful 5.2 Amp motor for excellent performance, coupled with double gear reduction for extra power. Variable speed lets you easily drill a variety of materials. Amps: 5.2, Chuck Size (in.): 3/8, Speed (RPM): 1,200, Side Handle: No, Keyless Chuck: No, Variable Speed: Yes, Case Included: No
|
| Customer Reviews:
 A Great All Around Drill March 16, 2008
Robert J. Marzinotto (Connecticut, U.S.A.)
5 out of 5 found this review helpful
This is one great drill. I was looking for a good basic drill for work in the shop,for general drilling and driving screws[witout constantly changing batteries] and this Makita more than fits the bill.Not too big,not too small. I already have a 1/2" Porter-Cable, a Porter-Cable hammer drill, a Milwaukee hole shooter, as well as a Makita cordless.However the one I reach for most is the 6402. It's just the right size, not too heavy and has good balance,and plenty of power. Say what you want about keyless chucks, they are a great convience, but give me a keyed chuck anyday. It only takes a few seconds more and a little effort.But they are the only ones that really lock the bit tight. Nothing more frustrating than to have constantly tighten up the chuck. Ive used it to drill and drive screws, and have put hole saws on it as well,and used a 1" forstner bit, and it has worked effortlessly,and it does not slip either. The reverse switch is in a good spot on the bottom,does not get in the way. No woodworker/handyman's tool box is complete without a Makita 6402. Its not the biggest,the baddest or the most powerful drill out there. But if you are looking for a great all around drill, the Makita 6402 is for you.[And the battery never seems to die just when you need it most] I almost bought a Milwaukee 3/8" drill. Its a super drill, but the size and weight are just like a 1/2" : kind of like a 1/2" drill disguised to look like a 3/8". A great drill, but I already have a 1/2", I dont need 2. Give this a workbench test drive, I doubt you will be disappointed. Ohh, did I forget to mention, its made in U.S.A.!! How many tools can you say that about today?
 rock solid l'il item December 10, 2008
Chambers Willy (Guam USA)
2 out of 2 found this review helpful
I'm not very much into keyless-chuck drills, and even less into cordless, so I bought this Makita 6402 as an all-around drill in my already-electrified shop. And when compared to, say, a similar Craftsman keyless-chuck 3/8 drill at half the price, what strikes me is the increased compactness or density of the Makita model. Also, the Makita's slower 1200 rpm would seem to be preferable since the black-oxide drill bits that are generally available these days are only rated to a maximum of 1500 rpm. My only gripe with this model has to do with the illustration as given here and elsewhere. An earlier model seems to be depicted, one that had a variable-speed dial built into trigger. Sadly, this is lacking in the currently-produced version that I received; although, I must confess, the variable speed trigger as supplied is very sensitive for low-speed drilling as needed. Also, a previous reviewer remarked that this drill was made in the USA. And while I appreciate and agree with his remarks as a whole, my own drill as received was made in Japan (although there's nothing wrong with this as far as I am concerned). Also preferable to the Milwaukee series as mentioned is the Makita 6402's more right-angled handle design. And the analogous 9 amp Hitachi model does indeed seem better-suited as a 1/2 drill, rather than 3/8. So let's hear it for Makita's maintaining a realistic balance between the motor and tool weight/dimensions.
Great Drill February 19, 2009
Christopher Douglas (Maryville Missouri)
1 out of 1 found this review helpful
Not the lightest drill I have ever used, but it has got a lot of power and this is a substantial drill to have in the shop. It is compact and has a heck of a chuck on it. Great for all day long use, and it has plenty of power. I highly recommend this drill for applications where you wear out the charge on a cordless drill too quickly, it tears right through whatever you can throw at it, and does everything a standard drill should do without breaking a sweat.
Sturdy and powerful November 11, 2009
D. Bernhard
This is an excellent broad-purpose corded-drill! It is sturdy and powerful. The chuck grips tightly, the trigger operates smoothly, the cord is long and flexible and the chuck key holder (attached to the cord) is handy. It's somewhat loud and heavy but those are acceptable tradeoffs for a drill that is so sturdy and powerful.
The old one almost lasted forever March 15, 2009
Donald E. Groom
My old Makita hand drill lasted several decades, but the switch finally failed. This one is much heavier, gutsy,
and just fine!
|
|
|
