Makita HP2010N 6 Amp 3/4-Inch Hammer Drill |  | Brand: Makita
Category: Home Improvement
List Price: $362.00
Buy New: $218.99
as of 7/31/2010 19:11 CDT details
You Save: $143.01 (40%)
New (9) from $218.99
Seller: Amazon.com
Rating:  reviews
Sales Rank: 79290
Media: Tools & Hardware
Autographed: No
Memorabilia: No
Number Of Items: 1
Shipping Weight (lbs): 6.6
Dimensions (in): 16.4 x 11.4 x 4.1
MPN: HP2010N
Model: HP2010N
UPC: 088381001328
EAN: 0088381001328
ASIN: B00004YOLB
Shipping: Eligible for FREE Super Saver Shipping
Availability: Usually ships in 24 hours
| |
| Features:
| • | 2-speed gear change for ideal speed and power | | • | Variable speed switch for easy starting of holes | | • | Depth gauge for "drop-in" type anchors | | • | Powerful 6 amp motor for continuous use | | • | All ball and needle bearings for long tool life |
|
| Accessories:
|
| Similar Items:
| |
| Editorial Reviews:
Product Description
6 Amp hammer drill delivers lots of power for extended use. Versatile 2-speed unit has ball and needle bearings for smooth drilling, while variable speed offers controlled starts. Industrial metal gear housing for long-lasting durability. Cordless: No, Rated RPM: 0 - 2,300, Amps: 6, Variable Speed: Yes, Blows Per Minute (BMP): 0 - 46,000, Case Included: Yes
|
| Customer Reviews:
Makita HP2010N December 13, 2001
18 out of 21 found this review helpful
I bought the Makita HP2010N back in 1990 and still have and use it today. It has been used extensively in hammer-mode with a 3-5/8" hole saw to cut holes for ceiling pan boxes in oak beams and for overhead drilling on post and beam construction. It will spin a 7/8" X 18" Greenlee Nail Eater in the "High Speed" position repeatedly through 12" solid oak beams with very little effort.
The ½"chuck is very good and when properly tightened, never seems to let the bit slip even under heavy hammering in masonry. This hammerdrill is heavier than the others I currently own and although it has a ¾" masonry capacity, it is slightly slower to complete holes when drilling in hardened concrete, mostly due to the lower impact of the Makita's hammer mechanism. Because of this, I use it mainly for drilling in hollow concrete block, hard wooden beams or metal, where this drill really excels. I wouldn't recommend it for heavy masonry drilling. A rotary hammer is usually a better choice for that type of work, but a hammerdrill such as this one can also do the job satisfactorily sometimes.
The HP2010N is a very rugged and well made tool. During almost twelve years of very hard, on the job use, the only repairs made have been to replace a worn out trigger switch, brushes (due to normal wear) and a damaged power cord.
I would definitely recommend this tool for anyone who is looking for a very durable, long lasting hammerdrill that will only occasionally be used for drilling in masonry.
 tilemans mixer April 19, 2009
Marlin Edinger Tile (memphis,TN. and anywhere else they want me.)
1 out of 1 found this review helpful
I have used makita hp2010n for mixing thinsets and grouts for over 20 years. I have only gone thru 3 of them. The weight is not as bad as other big drills I have used,(and those I gave away).I was talked into buying a lighter model the 2050. I used it for the last 2 years, when when my third 2010 burned up. Somewhat of a mistake, not enough power, and Today april 18th 2009, it died after 2 short years.I'm buying my forth hp2010n on line right now. One thing it and simular hammer/drills of this type can't do is be a real hammer drill, they are all to slow. So buy a hammer drill that takes sds bits etc.I have bosch and makita sds hammer drills they work great. As far as mixing thinsets, grouts for tiling and regular drilling with great power, I haven't found anything on the market I like better. Oh yeah and 5,6,7 days a week for 7 years each. Well you do the math.
 Ok drill, but lacking in power for more demanding applications June 21, 2010
Peppy
Purchased this drill with the intention of using it to mix small batches of mortar (5gal buckets) While it does work, it strains and gives off a burning smell when mixing a full bucket. I purchased the Milwaukee 5380-21 1/2-Inch 9-AMP Heavy Duty Hammer Drill a couple of weeks after this one, I am much more impressed with the milwaukee, it delivers the goods without the apparent strain on the motor that the makita displays. As a contractor intending on using this just about every day for mixing buckets of mortar, I couldn't see it lasting very long. Have since sold the makita and will keep the milwaukee. I would think that this drill would be more than adequate for home and light commercial use, however, for heavy duty use and at a cheaper price to boot, the milwaukee wins hands down!
|
|
|
